I have already done this. The config-reg is 0x2102.
And this is the same as with the other routers that do not have this tftp
problem. You have to wait quite a while before you can start configuring the
router. If this is a CCIE test, and you have this problem, then you lost a
lot of precious time.
Could this be IOS version no. specific? Or there is something else.
Thanks anyway for the response.
Arthur
>From: EA LOUIE <[EMAIL PROTECTED]>
>To: "Arthur Simplina" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: Re: [TFTP Error - Part 2]
>Date: 14 Mar 2001 10:59:47 PST
>
>sounds like config register to me.
>
>if you do a sh ver, and it's set to something other than 0x2102 would boot
>config off a tftp server, then change it
>
>config-reg 0x2102
>
>write your (empty) configuration
>
>and reload
>
>(if you're working on your certification, you'd be wise to know where that
>information is:
>
>http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2509/acsvrug/maint.htm#xtocid1285318
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
