My telecom had announced a service (for consumers) where you had an "always
on" D channel that could be used for email only at $5 a month. It never
materialized and I have no idea how they would have implemented this on the
head end.
Tim
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Brian
> Sent: Wednesday, March 14, 2001 10:58 PM
> To: Damien Kelly; [EMAIL PROTECTED]
> Subject: Re: Cisco1600 ISDN + D channell
>
>
> I saw that there is isdn technology that allows data to pass along the
> always up control channel. If I remember correctly, it passes 8k
> along it.
> I do not know how commercially available this is. Only use I
> could think of
> is you could then use it for dial on demand inbound, but do you want that.
>
> Bri
>
> ----- Original Message -----
> From: "Damien Kelly" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, March 14, 2001 7:10 AM
> Subject: FW: Cisco1600 ISDN + D channell
>
>
> > Just sending this again, No one commented.. was this a stupid
> question to
> > ask?
> >
> >
> >
> >
> > > Is it true that a cisco can be configured to use the D Channell to
> > > remotely bring up an ISDN line on a remote router configured
> for dial on
> > > demand?.
> > >
> > > I was told sometime ago that a cisco ( also DoD ) could be used to
> > > remotely connect to another cisco on a remote network which is on ISDN
> > > dialup, using the ISDN D Channell. anyone know if this is true, or
> > > possible? anyone have any experience in this?
> > >
> > >
> > > Any suggestions?
> > >
> > > Thanks
> > >
> > > Damien Kelly,
> > >
> > >
> >
> >
> > **********************************************************************
> > The information contained in this message is confidential and
> > is intended for the addressee(s) only. If you have received
> > this message in error or there are any problems please notify
> > the originator immediately. The unauthorised use, disclosure,
> > copying or alteration of this message is strictly forbidden. This
> > message and any attachments have been scanned for viruses.
> > Orbiscom Ltd. will not be liable for direct, special, indirect or
> > consequential damages arising from alteration of the contents
> > of this message by a third party or as a result of any virus being
> > passed on.
> >
> >
> > www.Orbiscom.com
> > **************************************
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
