Did it ever work?
Is this a production network or a lab?
Back to back serial, internal CSU/DSUs, or external CSU/DSUs?
Sounds like internal CSU/DSUs. If a production network, why clocking
internal? That's what you want in a lab.
> -----Original Message-----
> From: David Eitel [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 16, 2001 1:37 PM
> To: '[EMAIL PROTECTED]'
> Subject: Point to Point T1 connectivity
>
>
> I have a problem. I have a point to point t1
> router 1 Line up protocol down
> router 2 Line down protocol down
> On router 2 the alarm LED is on. Both routers shared the same circuit
> configs. Router 1 clocking is internal and router 2 clocking
> is line. Should
> the cables from the demark be straight through? One straight
> through? One
> crossed? Any advice would be greatly appreciated.
>
> David Eitel
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
