Hi gang...
>
> I have a problem that is driving me nutz. Take a look at my configs and
> see
> if you can figure it out.
>
> Diagram:
>
>
> ____|___|____ ethernet LAN
> |
> R1 --------------serial----------------------R2
>
>
>
> Problem: I can't ping anything on the LAN from R2
>
>
>
> R1#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname R1
> !
> !
> !
> interface Ethernet0
> ip address 10.1.5.1 255.255.0.0
> !
> interface Serial0
> ip address 10.128.1.1 255.128.0.0
> bandwidth 56
> clockrate 56000
> !
> interface Serial1
> no ip address
> shutdown
> !
> router ospf 200
> network 10.1.0.0 0.0.255.255 area 0
> network 10.128.0.0 0.0.255.255 area 0
> !
> ip classless
> !
> !
> line con 0
> logging synchronous
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
>
> R1 Routing Table:
>
> R1#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
> default
> U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
> 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> C 10.1.0.0/16 is directly connected, Ethernet0
> C 10.128.0.0/9 is directly connected, Serial0
> 172.16.0.0/32 is subnetted, 1 subnets
> O 172.16.25.1 [110/1786] via 10.128.1.2, 00:04:20, Serial0
>
>
> --------------------------------------------------------------------------
> --
> -------------
>
> Router #2
>
> R2#sh
> %SYS-5-CONFIG_I: Configured from console by console run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname R2
> !
> enable password ccna
> !
> !
> interface Loopback0
> ip address 172.16.25.1 255.255.0.0
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Serial0
> ip address 10.128.1.2 255.128.0.0
> !
> interface Serial1
> no ip address
> shutdown
> !
> router ospf 200
> network 10.128.0.0 0.0.255.255 area 0
> network 172.16.0.0 0.0.255.255 area 0
> !
> ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
>
> R2 Routing Table:
>
>
> R2#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
> default
> U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
> 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> O 10.1.0.0/16 [110/74] via 10.128.1.1, 00:06:04, Serial0
> C 10.128.0.0/9 is directly connected, Serial0
> C 172.16.0.0/16 is directly connected, Loopback0
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
