Additional comment:
Add the "bandwidth 56" to s0/0 of R2 to be the same as R1.
Arthur
> > Router #2
> >
> > R2#sh
> > %SYS-5-CONFIG_I: Configured from console by console run
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 11.2
> > no service password-encryption
> > no service udp-small-servers
> > no service tcp-small-servers
> > !
> > hostname R2
> > !
> > enable password ccna
> > !
> > !
> > interface Loopback0
> > ip address 172.16.25.1 255.255.0.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > !
> > interface Serial0
> > ip address 10.128.1.2 255.128.0.0
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > router ospf 200
> > network 10.128.0.0 0.0.255.255 area 0
> > network 172.16.0.0 0.0.255.255 area 0
> > !
> > ip classless
> > !
> > !
> > line con 0
> > line aux 0
> > line vty 0 4
> > password cisco
> > login
> > !
> > end
> >
> >
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
