more precisely, out both serial interfaces..
Brian
"Brian" <[EMAIL PROTECTED]> wrote in message
998nrc$3h8$[EMAIL PROTECTED]">news:998nrc$3h8$[EMAIL PROTECTED]...
> On each end, static route traffic out both interfaces.
>
> Bri
> "Jason Stephens" <[EMAIL PROTECTED]> wrote in message
> 998ndv$1fh$[EMAIL PROTECTED]">news:998ndv$1fh$[EMAIL PROTECTED]...
> > We have a situation where we want to have 2 t1's going to another
office.
> We
> > want these 2 t1's to not
> > only provide redundancy in case 1 goes down, but also want them to load
> > balance while they are both up.
> > So basically, we want the two t1's to be up providing 3 mpbs of
bandwidth
> > and if one goes down for it
> > to automatically send all traffic to the t1 that is still up. We have
3600
> > series routers on both ends. Can
> > this be done? If so, please explain how. I looked into the Multilink PPP
> > stuff, but it seems to be only for
> > async ports. Thanks for any info in advance!
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
