I have a Cisco 4000 I just received and I can't get it to take clock on 2 interfaces at once. Here's a copy of the config after I just typed "lock rate 56000" at the config-if mode for serial 0. Current configuration: ! version 11.1 service udp-small-servers service tcp-small-servers ! hostname R4000 ! enable secret 5 $1$1ETI$xqeVrzT8qlamhBz1pI4ZA/ ! frame-relay switching ! interface Serial0 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay route 301 interface Serial1 101 ! interface Serial1 no ip address encapsulation frame-relay clockrate 56000 frame-relay intf-type dce frame-relay route 101 interface Serial3 301 ! interface Serial2 no ip address shutdown ! interface Serial3 no ip address encapsulation frame-relay frame-relay intf-type dce ! no ip classless ! ! line con 0 password cisco login line aux 0 modem InOut line vty 0 4 password cisco login ! end Without applying clock the router won't allow the dlci's to map. This is my first attempt with a 4000 router. Here's the version output Cisco Internetwork Operating System Software IOS (tm) 4000 Software (XX-J-M), Version 11.1(14), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Thu 04-Sep-97 21:33 by tlane Image text-base: 0x00012000, data-base: 0x0067166C ROM: System Bootstrap, Version 5.2(11a), RELEASE SOFTWARE ROM: 4000 Bootstrap Software (XX-RXBOOT), Version 10.2(11a), RELEASE SOFTWARE (f c1) R4000 uptime is 24 minutes System restarted by power-on System image file is "flash:xx-j-mz.111-14", booted via flash cisco 4000 (68030) processor (revision 0xC0) with 16384K/4096K bytes of memory. Processor board ID 5032615 G.703/E1 software, Version 1.0. Bridging software. SuperLAT software copyright 1990 by Meridian Technology Corp). X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software (copyright 1994 by TGV Inc). 4 Serial network interfaces. 128K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 Any body got any ideas? Mike Bambic [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
