Hi everybody,
Can someone help me with the following problem
I've a customer with two 3640 router, both connected via an E1 interface
to a satellite dish on both customer sides.
The problem is that the satellite link does not provide any clocking, it
is a transparent connection ( the supplier told me that), so the routers
are running on their own clocks, and a few times a day they are running
out of sync, and the line is going down, and up again in a few seconds.
Is it possible that one of the routers provide a clock to the satellite
link, and that it is transported via the satellite, so the other router
can use this clock for synchronisation.
Regards John Zwaanswijk
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
