Can somebody tell me how come CDP may bring the line
up? As you know, it works only in layer 2 as said
before. Your dialer-list works at layer 3 & 4 only.
Did I miss something? :-(
--- Ya Wen <[EMAIL PROTECTED]> wrote:
> Try remove the "log" from the access-list 15
> associated with the route-map
> stuff. Also, you do not need the summary-address
> under OSPF.
>
> -Ya
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Patrick Murphy
> Sent: Friday, March 23, 2001 5:04 PM
> To: Leah Lynch; 'Jay Chandradas'; 'Chris Larson';
> 'Bob Boone';
> [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: bri flapping with demand cirquit/igrp
> redistribution
>
>
> Also check the BRI interface and see if you see
> IPCDP, it should disapper
> when you no cdp en!
>
> Patrick
>
> ----- Original Message -----
> From: "Leah Lynch" <[EMAIL PROTECTED]>
> To: "'Jay Chandradas'" <[EMAIL PROTECTED]>; "'Chris
> Larson'"
> <[EMAIL PROTECTED]>; "'Bob Boone'"
> <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Friday, March 23, 2001 7:45 PM
> Subject: RE: bri flapping with demand cirquit/igrp
> redistribution
>
>
> > I think you normally disable CDP in dialup lines
> for efficiency.
> >
> > Leah
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Jay Chandradas
> > Sent: Friday, March 23, 2001 2:57 PM
> > To: Chris Larson; Bob Boone; [EMAIL PROTECTED];
> > [EMAIL PROTECTED]
> > Subject: Re: bri flapping with demand cirquit/igrp
> redistribution
> >
> >
> >
> >
> > I am not sure CDP will keep the line up ? And ur
> interesting traffic is
> > permit ip any any . I dont think CDP will keep the
> line up. When u do a
> > debug ip pack.. u can nvr see CDP.. CDP is layer
> 2.
> >
> > my 0.02
> >
> > ----- Original Message -----
> > From: "Chris Larson" <[EMAIL PROTECTED]>
> > To: "Bob Boone" <[EMAIL PROTECTED]>; "Jay
> Chandradas"
> <[EMAIL PROTECTED]>;
> > <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Friday, March 23, 2001 2:40 PM
> > Subject: RE: bri flapping with demand cirquit/igrp
> redistribution
> >
> >
> > > Will CDP keep the line up? Turn off CDP.
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Bob Boone
> > > Sent: Friday, March 16, 2001 5:30 PM
> > > To: Jay Chandradas; [EMAIL PROTECTED];
> [EMAIL PROTECTED]
> > > Subject: Re: bri flapping with demand
> cirquit/igrp redistribution
> > >
> > >
> > > Yes i do have passive BRI on IGRP, and also, the
> way it is done now, it
> > > restricts ALL networks, if you look at the
> access-list 15 it has one
> > > statement and then explisit deny all.
> > > still not working.
> > >
> > > ----- Original Message -----
> > > From: "Jay Chandradas" <[EMAIL PROTECTED]>
> > > To: "Netguy" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>;
> > > <[EMAIL PROTECTED]>
> > > Sent: Friday, March 16, 2001 12:22 PM
> > > Subject: Re: bri flapping with demand
> cirquit/igrp redistribution
> > >
> > >
> > > > 1. DO u have a passive interface on bri0 under
> router IGRP
> > > >
> > > > 2. I wud do this way !! when u r redisributing
> into OSPG .. allow only
> > the
> > > > IGRP networks ( including the network conneted
> with is running IGRP )
> > > >
> > > > Jay
> > > >
> > > > when u r redistributing into
> > > > ----- Original Message -----
> > > > From: "Netguy" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> > > > Sent: Friday, March 16, 2001 12:01 PM
> > > > Subject: bri flapping with demand cirquit/igrp
> redistribution
> > > >
> > > >
> > > > > > Hello all you happy people.
> > > > > > Router A has ospf/igrp mutual
> redistribution and bri
> > > > > > int dialing elsewhere with demand circuit.
> it keeps
> > > > > > flapping.
> > > > > > i followed someone's advice and created a
> route/map
> > > > > > filter to filter out bri network from igrp
> > > > > > redistributing back into ospf.
> > > > > > what the hell am i doing wrong? i know its
> a big
> > > > > > thing
> > > > > > that lots of people had problems with.
> > > > > > here's the key configs:
> > > > > > interface BRI0/0
> > > > > > ip address 173.5.8.1 255.255.255.252
> > > > > > encapsulation ppp
> > > > > > ip ospf demand-circuit
> > > > > > dialer idle-timeout 15
> > > > > > dialer map ip 173.5.8.2 name R5 broadcast
> 8667007
> > > > > > dialer map ip 173.5.8.2 name R5 broadcast
> 8667008
> > > > > > dialer load-threshold 128 outbound
> > > > > > dialer-group 1
> > > > > > isdn switch-type basic-dms100
> > > > > > isdn spid1 9258667005
> > > > > > isdn spid2 9258667006
> > > > > > ppp authentication chap
> > > > > > ppp chap hostname CCIE
> > > > > > ppp multilink
> > > > > >
> > > > > >
> > > > > > router ospf 1
> > > > > > log-adjacency-changes
> > > > > > area 0 authentication message-digest
> > > > > > area 0 range 173.5.1.0 255.255.255.0
> > > > > > summary-address 173.5.10.0 255.255.255.0
> > > > > > redistribute igrp 100 metric 100 subnets
> route-map
> > > > > > stuff
> > > > > > network 1.1.1.0 0.0.0.3 area 0
> > > > > > network 173.5.1.0 0.0.0.15 area 0
> > > > > > network 173.5.7.0 0.0.0.7 area 3
> > > > > > network 173.5.8.0 0.0.0.3 area 3
> > > > > > network 173.5.10.0 0.0.0.127 area 3
> > > > > > network 173.5.17.0 0.0.0.255 area 0
> > > > > > access-list 15 permit 173.5.8.0 0.0.0.3
> log
> > > > > > route-map stuff deny 5
> > > > > > match ip address 15
> > > > > > !
> > > > > > route-map stuff permit 10
> > > > > > set tag 4
> > > > > >
> > > > > >
> __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Get email at your own domain with Yahoo!
> Mail.
> > > > > > http://personal.mail.yahoo.com/
> > > > >
> > > > >
> > > > >
> __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Get email at your own domain with Yahoo!
> Mail.
> > > > > http://personal.mail.yahoo.com/
> > > > >
> > > > >
>
_______________________________________________________
> > > > > To unsubscribe from the CCIELAB list, send a
> message to
>
=== message truncated ===
=====
Vincent
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
