It may not, I have just always disabled it on dialer links as a habit. It
makes sense that it shouldn't since the dialer-list defines layer 3 traffic
only. You could always put an access-list on the dialer interface permitting
all traffic with the log statement to see exactly what is trying to get
accross the line. It will output to the console if you are consoled in. That
may help you to see what is bringing the line up.
-----Original Message-----
From: perez claude-vincent [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 24, 2001 9:22 AM
To: Ya Wen; Patrick Murphy; Leah Lynch; 'Jay Chandradas'; 'Chris
Larson'; 'Bob Boone'; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: bri flapping with demand cirquit/igrp redistribution
Can somebody tell me how come CDP may bring the line
up? As you know, it works only in layer 2 as said
before. Your dialer-list works at layer 3 & 4 only.
Did I miss something? :-(
--- Ya Wen <[EMAIL PROTECTED]> wrote:
> Try remove the "log" from the access-list 15
> associated with the route-map
> stuff. Also, you do not need the summary-address
> under OSPF.
>
> -Ya
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Patrick Murphy
> Sent: Friday, March 23, 2001 5:04 PM
> To: Leah Lynch; 'Jay Chandradas'; 'Chris Larson';
> 'Bob Boone';
> [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: bri flapping with demand cirquit/igrp
> redistribution
>
>
> Also check the BRI interface and see if you see
> IPCDP, it should disapper
> when you no cdp en!
>
> Patrick
>
> ----- Original Message -----
> From: "Leah Lynch" <[EMAIL PROTECTED]>
> To: "'Jay Chandradas'" <[EMAIL PROTECTED]>; "'Chris
> Larson'"
> <[EMAIL PROTECTED]>; "'Bob Boone'"
> <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Friday, March 23, 2001 7:45 PM
> Subject: RE: bri flapping with demand cirquit/igrp
> redistribution
>
>
> > I think you normally disable CDP in dialup lines
> for efficiency.
> >
> > Leah
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Jay Chandradas
> > Sent: Friday, March 23, 2001 2:57 PM
> > To: Chris Larson; Bob Boone; [EMAIL PROTECTED];
> > [EMAIL PROTECTED]
> > Subject: Re: bri flapping with demand cirquit/igrp
> redistribution
> >
> >
> >
> >
> > I am not sure CDP will keep the line up ? And ur
> interesting traffic is
> > permit ip any any . I dont think CDP will keep the
> line up. When u do a
> > debug ip pack.. u can nvr see CDP.. CDP is layer
> 2.
> >
> > my 0.02
> >
> > ----- Original Message -----
> > From: "Chris Larson" <[EMAIL PROTECTED]>
> > To: "Bob Boone" <[EMAIL PROTECTED]>; "Jay
> Chandradas"
> <[EMAIL PROTECTED]>;
> > <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Friday, March 23, 2001 2:40 PM
> > Subject: RE: bri flapping with demand cirquit/igrp
> redistribution
> >
> >
> > > Will CDP keep the line up? Turn off CDP.
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Bob Boone
> > > Sent: Friday, March 16, 2001 5:30 PM
> > > To: Jay Chandradas; [EMAIL PROTECTED];
> [EMAIL PROTECTED]
> > > Subject: Re: bri flapping with demand
> cirquit/igrp redistribution
> > >
> > >
> > > Yes i do have passive BRI on IGRP, and also, the
> way it is done now, it
> > > restricts ALL networks, if you look at the
> access-list 15 it has one
> > > statement and then explisit deny all.
> > > still not working.
> > >
> > > ----- Original Message -----
> > > From: "Jay Chandradas" <[EMAIL PROTECTED]>
> > > To: "Netguy" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>;
> > > <[EMAIL PROTECTED]>
> > > Sent: Friday, March 16, 2001 12:22 PM
> > > Subject: Re: bri flapping with demand
> cirquit/igrp redistribution
> > >
> > >
> > > > 1. DO u have a passive interface on bri0 under
> router IGRP
> > > >
> > > > 2. I wud do this way !! when u r redisributing
> into OSPG .. allow only
> > the
> > > > IGRP networks ( including the network conneted
> with is running IGRP )
> > > >
> > > > Jay
> > > >
> > > > when u r redistributing into
> > > > ----- Original Message -----
> > > > From: "Netguy" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> > > > Sent: Friday, March 16, 2001 12:01 PM
> > > > Subject: bri flapping with demand cirquit/igrp
> redistribution
> > > >
> > > >
> > > > > > Hello all you happy people.
> > > > > > Router A has ospf/igrp mutual
> redistribution and bri
> > > > > > int dialing elsewhere with demand circuit.
> it keeps
> > > > > > flapping.
> > > > > > i followed someone's advice and created a
> route/map
> > > > > > filter to filter out bri network from igrp
> > > > > > redistributing back into ospf.
> > > > > > what the hell am i doing wrong? i know its
> a big
> > > > > > thing
> > > > > > that lots of people had problems with.
> > > > > > here's the key configs:
> > > > > > interface BRI0/0
> > > > > > ip address 173.5.8.1 255.255.255.252
> > > > > > encapsulation ppp
> > > > > > ip ospf demand-circuit
> > > > > > dialer idle-timeout 15
> > > > > > dialer map ip 173.5.8.2 name R5 broadcast
> 8667007
> > > > > > dialer map ip 173.5.8.2 name R5 broadcast
> 8667008
> > > > > > dialer load-threshold 128 outbound
> > > > > > dialer-group 1
> > > > > > isdn switch-type basic-dms100
> > > > > > isdn spid1 9258667005
> > > > > > isdn spid2 9258667006
> > > > > > ppp authentication chap
> > > > > > ppp chap hostname CCIE
> > > > > > ppp multilink
> > > > > >
> > > > > >
> > > > > > router ospf 1
> > > > > > log-adjacency-changes
> > > > > > area 0 authentication message-digest
> > > > > > area 0 range 173.5.1.0 255.255.255.0
> > > > > > summary-address 173.5.10.0 255.255.255.0
> > > > > > redistribute igrp 100 metric 100 subnets
> route-map
> > > > > > stuff
> > > > > > network 1.1.1.0 0.0.0.3 area 0
> > > > > > network 173.5.1.0 0.0.0.15 area 0
> > > > > > network 173.5.7.0 0.0.0.7 area 3
> > > > > > network 173.5.8.0 0.0.0.3 area 3
> > > > > > network 173.5.10.0 0.0.0.127 area 3
> > > > > > network 173.5.17.0 0.0.0.255 area 0
> > > > > > access-list 15 permit 173.5.8.0 0.0.0.3
> log
> > > > > > route-map stuff deny 5
> > > > > > match ip address 15
> > > > > > !
> > > > > > route-map stuff permit 10
> > > > > > set tag 4
> > > > > >
> > > > > >
> __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Get email at your own domain with Yahoo!
> Mail.
> > > > > > http://personal.mail.yahoo.com/
> > > > >
> > > > >
> > > > >
> __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Get email at your own domain with Yahoo!
> Mail.
> > > > > http://personal.mail.yahoo.com/
> > > > >
> > > > >
>
_______________________________________________________
> > > > > To unsubscribe from the CCIELAB list, send a
> message to
>
=== message truncated ===
=====
Vincent
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]