A show controller mci on the AGS+ shows that all serial ports are in DTE
mode.
In debug serial interface mode mineseen=0, yourseen=0 and I get a lot of
carrier transitions in sh int s0.
"Daniel Cotts" <[EMAIL PROTECTED]> wrote in message
303479FA060CD211B8930000F805A88AA110EF@EXCHANGE1">news:303479FA060CD211B8930000F805A88AA110EF@EXCHANGE1...
> As a first shot I'd verify those jumpers.
>
> > -----Original Message-----
> > From: ciscojolof [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, March 26, 2001 9:57 AM
> > To: [EMAIL PROTECTED]
> > Subject: AGS+(DTE) to 2523(DCE) back-to-back
> >
> >
> > Hi,
> >
> > For 3months I have been trynig to have my AGS+(DTE) talk to
> > my 2523(DCE).
> > I am at my fourth back-to-back cable.
> > The 2523 is sending keepalives but the AGS+ is not.
> > AGS+ is DTE BY DEFAULT, so I didn't tinker with its jumpers.
> > Have someone ever made an AGS+(DTE) talk to a 25xx(DCE)?
> >
> > Please help me.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct
> > and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
