I've done this many times. What have you tried ??? There are pins to be
set on the Serial card. Most people want the AGS to send clock, say for a
Frame or X.25 cloud.
Anywho- list your present situation & the cable you are using. This should
not be a hard issue
Phil
PS- see the attached for a sheet I made for a friend who was having simular
issues with DCE setting.
----- Original Message -----
From: "ciscojolof" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Monday, March 26, 2001 2:56 PM
Subject: AGS+(DTE) to 2523(DCE) back-to-back
> Hi,
>
> For 3months I have been trynig to have my AGS+(DTE) talk to my 2523(DCE).
> I am at my fourth back-to-back cable.
> The 2523 is sending keepalives but the AGS+ is not.
> AGS+ is DTE BY DEFAULT, so I didn't tinker with its jumpers.
> Have someone ever made an AGS+(DTE) talk to a 25xx(DCE)?
>
> Please help me.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
