Further to my post regarding 2600's a few days ago.
I received an e-mail from Rick Thompson (Thanks) as below:
>I have run across the same thing with the 3600
>routers. It counts the first serial card as 0, no
>matter if it is in slot 0 or 1.
>Rick Thompson
so I decided to drag a 3600 out and try a few things.
Working with an NM1E2W:
Inserted a WIC1T into slot w1 - This becomes S2/0 (Strange but agreeing with
previous findings).
Configured S2/0 with IP address and WR MEM.
Powered down and inserted another WIC1T into slot w0.
The new WIC1T now becomes S2/0.
With both interfaces configured I powered down and removed w0. The card in
w1 becomes S2/0 again.
Is this a standard fact for all modular routers that the first card inserted
will become 0, no matter which slot it's in, or is this platform/IOS
specific?
Cheers,
Gareth
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]