Do a Sho FLASH to see if it may be partitioned. If it says 4 Megs, then
it's a 4 Meg stick. Usually the FLASH either works or not. I know with
RAM, incompatible speeds (nanoseconds) will read lower than reality.
Phil
----- Original Message -----
From: "John Chang" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 2:25 AM
Subject: 2500 Flash ?
> I have a 2504 and I put in a 8MB flash but when it starts up it says it's
a
> 4MB flash. Is there something I need to do so that it sees it
> correctly? Thank you.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]