You sure can.... see here for details...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/span.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/span.htm#15238
You can also use VACLS to push your traffic through the IDS...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/acc_list.htm#xtocid929046
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/acc_list.htm#xtocid92906
Tim
"Ruihai An" <[EMAIL PROTECTED]> wrote in message
9a0fri$8hf$[EMAIL PROTECTED]">news:9a0fri$8hf$[EMAIL PROTECTED]...
We need at least two SPAN ports on each 6505 switch to connect our IDS and
Sniffer. When we config the second SPAN, it always overwrite the prevously
configured SPAN port. It seems you can not configure more than more than
two SPAN on one switch. I am not sure if that is true.
Thanks
Ruihai
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
