I had somewhat the same issue. I'm not sure if it proper networking =
etiquette, but I was able configure our CheckPoint/ Nokia IDS & Cisco/ =
NetScout SwitchProbe for 10 BaseT... so I stuck a $40 NetGear hub off of =
the SPAN & it works perfectly. Dual Span- is a good question though, I =
never tried... thinking it would echo (or wouldn't be accurate on both =
ports). =20
Just a thought
Phil
"Ruihai An" <[EMAIL PROTECTED]> wrote in message =
9a0fri$8hf$[EMAIL PROTECTED]">news:9a0fri$8hf$[EMAIL PROTECTED]...
> We need at least two SPAN ports on each 6505 switch to connect our IDS =
and
> Sniffer. When we config the second SPAN, it always overwrite the =
prevously
> configured SPAN port. It seems you can not configure more than more =
than
> two SPAN on one switch. I am not sure if that is true.
>=20
> Thanks
>=20
> Ruihai
>=20
>=20
> _________________________________
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
