or u can type "sh ip route"
to see r there any problem in ur routing table
<[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
> I have a question - please if I have overlooked something just point me in
the
> right direction, I'm not looking to be spoon fed. :) I looked through the
Cisco
> web site and documentation that I had but I was wondering if anyone else
had
> seen this.
>
> I have two routers in a test lab, a 2509 and a 2514. Without going into
great
> details regarding the way they are configured (I can certainly provide
more
> detail if necessary - I just figured this might be a simple dumb thing I
> overlooked type question), neither router can ping their own serial port.
> However, each can ping the others serial port. Both routers can ping their
own
> Ethernet port, but neither can ping the others. IP is the only protocol
> configured, the 2509 is configured as the DCE, the 2514 as the DTE. Both
are
> running IOS 11.3.
>
> There are other issues as well, but the whole "can't ping their own
interface"
> thing has me confused....any ideas?
>
> I'm going to scrap both configs today and start from scratch, but this was
> driving me nuts!
>
> TIA
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
