1) Make sure that you have sufficient DRAM for the image to run. Check the release notes for the CatOS version. 2) It appears that you are trying to tftp a sup3 image to a SupII. 3) Can you ping the tftp server from the switch? The switch from the tftp server? 4) If the name of the file in your tftp folder doesn't match what you have typed-in, then the tftp server will return a not found. > -----Original Message----- > From: Rich Chang [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, April 03, 2001 3:59 PM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Upgrading Catalyst 5000 IOS--get repeated TFTP errors. Please > help! > > > --I am trying to upgrade the IOS on a Catalyst 5000 Cisco > Switch to the > latest 6.1 series. I am using a CATALYST II SUPERVISOR MMF. I > am trying > to upgrade the IOS to 6.1 which is about 4.5 megs or better. > but I fear > my Flash is too low? Or is it? --Show version says 8192K > available,3840K > used,4352K avaialable" However shouldnt I be overwriting the 3840 used > Flash also?--I keep getting TFTP and switch error messages > (shown below) > I am confused. Could someone please read through these log files and > please help me? > > FIRST, When I type show version, this is what I get: > > "System Bootstrap Version: 2.2(2) Hardware Version: 1.0 > Model: WS-C5000 > Serial #: 006051071 Mod Port Model Serial # Versions --- ---- > ---------- > --------- ---------------------------------------- 1 2 > WS-X5506 006051071 > Hw : 1.0 Fw : 2.2(2) Fw1: 2.2(1) Sw : 4.4(1) 2 24 WS-X5010 > 003617325 Hw : > 2.4 Fw : 1.1 Sw : 4.4(1) DRAM > FLASH NVRAM Module Total Used Free Total > Used Free Total > Used Free ------ ------- ------- ------- ------- ------- ------- ----- > ----- ----- 1 16384K 9905K 6479K 8192K 3840K 4352K 256K 107K > 149K Uptime > is 6 days, 2 hours, 23 minutes SWITCH#2 (enable)" > > SECOND, This is what I get when I try to run the TFTP command: > > "SWITCH#2 (enable) copy tftp flash IP address or name of remote host > [172.26.100.1]? Name of file to copy from [cat5000-sup3.5-5-6.bin]? > Download image file cat5000-sup3.5-5-6.bin is unrecognized! SWITCH#2 > (enable)" > > THIRD: This is the TFTP Error Message: > > "Tue Apr 03 15:49:33 2001: Failed ( State Error ). Tue Apr 03 15:53:42 > 2001: Sending 'cat5000-sup3.5-5-6.bin' file to 172.26.100.2 in binary > mode # Tue Apr 03 15:53:42 2001: Failed ( State Error )." > > -------------------------------------------------------------- > ---------- > > Get your FREE download of MSN Explorer at http://explorer.msn.com > Report misconduct > and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
