I agree with Dan's point # 2. You are trying to use the Sup3 image with a
Sup2 module.The Sup2 doesn't recognize the code. This a problem I've
encountered. I tried the same thing with a Cat 6500 with similar results,
once I used the right image, no problems.
John
Daniel Cotts <[EMAIL PROTECTED]> wrote in message
303479FA060CD211B8930000F805A88AA11161@EXCHANGE1">news:303479FA060CD211B8930000F805A88AA11161@EXCHANGE1...
> 1) Make sure that you have sufficient DRAM for the image to run. Check the
> release notes for the CatOS version.
> 2) It appears that you are trying to tftp a sup3 image to a SupII.
> 3) Can you ping the tftp server from the switch? The switch from the tftp
> server?
> 4) If the name of the file in your tftp folder doesn't match what you have
> typed-in, then the tftp server will return a not found.
>
> > -----Original Message-----
> > From: Rich Chang [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, April 03, 2001 3:59 PM
> > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: Upgrading Catalyst 5000 IOS--get repeated TFTP errors. Please
> > help!
> >
> >
> > --I am trying to upgrade the IOS on a Catalyst 5000 Cisco
> > Switch to the
> > latest 6.1 series. I am using a CATALYST II SUPERVISOR MMF. I
> > am trying
> > to upgrade the IOS to 6.1 which is about 4.5 megs or better.
> > but I fear
> > my Flash is too low? Or is it? --Show version says 8192K
> > available,3840K
> > used,4352K avaialable" However shouldnt I be overwriting the 3840 used
> > Flash also?--I keep getting TFTP and switch error messages
> > (shown below)
> > I am confused. Could someone please read through these log files and
> > please help me?
> >
> > FIRST, When I type show version, this is what I get:
> >
> > "System Bootstrap Version: 2.2(2) Hardware Version: 1.0
> > Model: WS-C5000
> > Serial #: 006051071 Mod Port Model Serial # Versions --- ----
> > ----------
> > --------- ---------------------------------------- 1 2
> > WS-X5506 006051071
> > Hw : 1.0 Fw : 2.2(2) Fw1: 2.2(1) Sw : 4.4(1) 2 24 WS-X5010
> > 003617325 Hw :
> > 2.4 Fw : 1.1 Sw : 4.4(1) DRAM
> > FLASH NVRAM Module Total Used Free Total
> > Used Free Total
> > Used Free ------ ------- ------- ------- ------- ------- ------- -----
> > ----- ----- 1 16384K 9905K 6479K 8192K 3840K 4352K 256K 107K
> > 149K Uptime
> > is 6 days, 2 hours, 23 minutes SWITCH#2 (enable)"
> >
> > SECOND, This is what I get when I try to run the TFTP command:
> >
> > "SWITCH#2 (enable) copy tftp flash IP address or name of remote host
> > [172.26.100.1]? Name of file to copy from [cat5000-sup3.5-5-6.bin]?
> > Download image file cat5000-sup3.5-5-6.bin is unrecognized! SWITCH#2
> > (enable)"
> >
> > THIRD: This is the TFTP Error Message:
> >
> > "Tue Apr 03 15:49:33 2001: Failed ( State Error ). Tue Apr 03 15:53:42
> > 2001: Sending 'cat5000-sup3.5-5-6.bin' file to 172.26.100.2 in binary
> > mode # Tue Apr 03 15:53:42 2001: Failed ( State Error )."
> >
> > --------------------------------------------------------------
> > ----------
> >
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > Report misconduct
> > and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
