Today I just had the NM-2FE2W worked on 3620 with the IOS 12.1(5T)T.bin
version. I wonder if IOS 12.1.7 (latest version) will support this as
well???
""Gareth Hinton"" <[EMAIL PROTECTED]> wrote in message
9ag1jp$im0$[EMAIL PROTECTED]">news:9ag1jp$im0$[EMAIL PROTECTED]...
> I'm running 12.1(1)T in a 3620 and from memory I believe 12.1(5)T in a
3660
> both with NM2FE2W.
> I'm fairly sure any T image after 12.1(1)T will do the trick. Certainly
CCO
> says so.
>
> Cheers,
>
> Gareth
>
> ""John Kurkjian"" <[EMAIL PROTECTED]> wrote in message
> 9aeiju$lmg$[EMAIL PROTECTED]">news:9aeiju$lmg$[EMAIL PROTECTED]...
> > 1) IOS "T" does NOT support FE NM's, "XK" does.
> >
> > 2) If you put the flash in a 2600 to upgrade, how will the 2600 boot? As
> > time consuming as it may be, use the console port to upload the
> > image - OR- Use a PCMCIA flash card in a router that is up & running &
> tftp
> > the 3620 image to the card & use it to boot the new router, then
> > copy to flash.(I used a 1601R to do this and it worked great)
> >
> > Good luck
> >
> > John
> >
> > P.S - you can increase the baud rate on the console port to speed things
> up,
> > just remember the rate for future console connections.
> > "Thomas" <[EMAIL PROTECTED]> wrote in message
> > 9aeg25$ig9$[EMAIL PROTECTED]">news:9aeg25$ig9$[EMAIL PROTECTED]...
> > > Someone told me that IOS version followed with 'T' will support (like
> > > 12.0(5)T...). Do you think the latest version 12.1.7 will support
this
> > > NM-2FE2W module? Thanks!
> > >
> > >
> > >
> > > "Nick Brooks" <[EMAIL PROTECTED]> wrote in message
> > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > 12.0.7XK is the first version to support the new combo modules
> > > >
> > > > Thomas wrote:
> > > >
> > > > > Hi All - I have a 3620 router and a NM-2FE2W module. What version
> of
> > > IOS
> > > > > supports this NM-2FE2W on 3620? The router is currently has the
> > > standard IP
> > > > > IOS version installed. If a different IOS version is needed, is
it
> > > possible
> > > > > if I place the flash of this 3620 router into a 2600 router and do
> the
> > > IOS
> > > > > upgrade from there, then put it back to the 3620 once done???
> Thanks
> > > All!
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
