Are you sure that information isn't just taken from the "bandwidth" statements on the
subinterfaces?
Greg Owens <[EMAIL PROTECTED]> wrote:
> Sh frame map will show u the CIR
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stephen Skinner
Sent: Monday, April 09, 2001 7:45 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: How to determine CIR and increase CIR of FR?
your CIR (Committed information rate) is supplied by your SP ...you and him
agree how much you can have( depending on how much you pay)
usually ....the person setting up your router sets the "BANDWIDTH" command
to the CIR+ BR (burst rate) I.E how high you CAN go up to for a limited
amount of time ......again your service provider has set this for you .....
HTH
steve
>From: "David Gollop"
>Reply-To: "David Gollop"
>To: [EMAIL PROTECTED]
>Subject: How to determine CIR and increase CIR of FR?
>Date: Mon, 09 Apr 2001 10:29:40 -0000
>
>Hi.. How to determine the CIR of a frame relay line? Like Result shown
>below, what is the CIR? How do I increase the CIR? Do we have to contact
>the Frame relay provider? What is the difference between CIR and EIR??
>
>
>SIN01#sh int s1/1.19
>Serial1/1.19 is up, line protocol is up
> Hardware is M4T
> Description: --- Connects to JKT01 Ser0.2 ---
> Internet address is 50.200.243.25/30
> MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
> reliability 255/255, txload 2/255, rxload 2/255
> Encapsulation FRAME-RELAY IETF
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]