Valeri,
You can either use GRE protocol (I haven't tested with on PIX myself) or,
you can use Novell's Compatibly mode server. This allows you to
convert/translate IPX to IP to pass through the PIX. These servers
basically run on very low-end machine (we're running P166).
HTH,
Nabil
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 11, 2001 7:47 AM
To: [EMAIL PROTECTED]
Subject: PIX and IPX traffic [7:207]
as far as i know is PIX pure ip firewall - right?
so if i have a server in the outside/untrusted that needs to
recieve/send ipx/spx traffic
i will need to tunnel the ipx/spx traffic somehow ....
can someone give me an example or point me to the right link with some
infos on this
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=232&t=207
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
