> You can either use GRE protocol (I haven't tested with on PIX myself) or,
> you can use Novell's Compatibly mode server. This allows you to
> convert/translate IPX to IP to pass through the PIX. These servers
> basically run on very low-end machine (we're running P166).
thanks Nabil
never configured GRE or PPTP ..... looks pretty difficult because it should
be
configure
on all communication partners (pix,router,server) .... to high-end for me :)
i am also a newbie in PIX configuration ...
the server i mean will only use NetWare Client - it is an NT machine
and yes i've seen this IPX/SPX over IP option on NetWare Client
what about the programs that use IPX/SPX - will they notice the difference?
i know i can just try - but better ask first - you have the experience
thank you very much for the infos anyway and in advance
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=246&t=207
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
