You need the "ip forward-protocol udp" command.
Charles
-----Original Message-----
From: Infotech
To: [EMAIL PROTECTED]
Sent: 12/04/01 05:36
Subject: Inter vlan routing [7:308]
Group Pls help me with this config:-
cat 4k switch--->cat6509<------ cat 4k switch
vlan 1 Vlan2
NT PDC 1 NT PDC 2
USERx USERy
I have a small setup of 3 catalyst switches. CAT6509 main switch is
having 2 SUP module (one for redundancy & 2 MSFC card for routing
purpose.
There are 2 cat4003 switches installed at 2 diff floors & both are part
of
diff vlan's - VLAN1 & VLAN2.
My users are facing problem when they try to access opposite side vlan
when
actually sitting in one vlan. they sometimes not able to login. The
error
they get is domain server not available & also does not get IP address
from DHCP server. But they can login to local domain which is part of
local
VLAN. This problem is only faced by users having laptop (IBM).
Does anybody faced this problem ever.
On both of my servers NT 2 way trust relationship is established so that
users can login to any domain. I have also specified ip helper-address
in
my main 6509 MSFC card. The switches are connected via gigabit uplink
ports.
It is not login id problem because I am able to login to both the server
when I physically go to opposite vlan & managed to login to both the
server.
help appreciated...
regds
HP
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=326&t=308
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
