make sure the ip helper is set up on both interfaves to each vlan.
also add ip helper to your wins server....if you have one
Infotech wrote:
> Group Pls help me with this config:-
>
> cat 4k switch--->cat6509 vlan 1 Vlan2
> NT PDC 1 NT PDC 2
>
> USERx USERy
>
> I have a small setup of 3 catalyst switches. CAT6509 main switch is
> having 2 SUP module (one for redundancy & 2 MSFC card for routing purpose.
> There are 2 cat4003 switches installed at 2 diff floors & both are part of
> diff vlan's - VLAN1 & VLAN2.
> My users are facing problem when they try to access opposite side vlan when
> actually sitting in one vlan. they sometimes not able to login. The error
> they get is domain server not available & also does not get IP address
> from DHCP server. But they can login to local domain which is part of local
> VLAN. This problem is only faced by users having laptop (IBM).
> Does anybody faced this problem ever.
>
> On both of my servers NT 2 way trust relationship is established so that
> users can login to any domain. I have also specified ip helper-address in
> my main 6509 MSFC card. The switches are connected via gigabit uplink
ports.
> It is not login id problem because I am able to login to both the server
> when I physically go to opposite vlan & managed to login to both the
server.
>
> help appreciated...
>
> regds
> HP
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=451&t=308
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
