Gayathri,
Giving "ip cef" in global mode turns only CEF processing & start
building fib table, to enable netflow type "ip route-cache flow" command
under interface. Based on router you are using it if you type no ip
route-cache cef & no ip route-cache distributed then the fallback is either
fast or optimum switching.
thanks
rahul.
----- Original Message -----
From: "Gayathri"
To:
Sent: Wednesday, April 11, 2001 9:03 PM
Subject: CEF [7:304]
> Hi,
>
> If i have a statement 'ip cef' in the router, does this mean I have
enabled
> netflow?
>
> Under the interfaces , the configuration is
> no ip route-cache cef
> no ip route-cache distributed
>
> Thanks for any inputs...
>
>
> Regards
>
> Gayathri
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=400&t=304
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
