you want to
Router#erase flash
first to delete the files in on of those partitions (partition 2 in this
case).
Then,
Partition the flash with
Router(config)#partition flash 1 16
where 1 is the partition number and 16 is the size (in MB) of the partition.
Let me know if you have other questions regarding this problem.
-----Original Message-----
From: Frank Kim [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 12, 2001 9:28 PM
To: [EMAIL PROTECTED]
Subject: two 8 megs of flash on a 2501 [7:439]
Hi folks,
Is it possible to combine two flash partition into one so I can put a
bigger ios image in the router? Currently it shows as:
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(12), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 11-Jul-00 08:19 by htseng
Image text-base: 0x030388DC, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
SOFTWARE (fc1)
Router uptime is 1 hour, 11 minutes
System restarted by power-on
System image file is "flash:c2500-d-l.120-12.bin"
cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of
memory.
Processor board ID 04849258, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read ONLY)
8192K bytes of processor board System flash partition 2 (Read/Write)
Configuration register is 0x2102
Thanks for any help.
-Frank
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
*****************************************************************
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail or any information contained therein by any other
person is not authorized. If you are not the intended recipient please
notify us immediately by returning the e-mail to the originator.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=442&t=439
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
