EEEEK- not again.  #no partition FLASH or set your partition to (1) 16 size.
I have not done this for awhile, but I think you must erase the IOS in some
instances.  Again- there are a couple of ways to do this, but #no partition
FLASH has always done the job for me.

All the best !!!
Phil

----- Original Message -----
From: Frank Kim 
To: 
Sent: Thursday, April 12, 2001 9:27 PM
Subject: two 8 megs of flash on a 2501 [7:439]


> Hi folks,
> Is it possible to combine two flash partition into one so I can put a
> bigger ios image in the router?  Currently it shows as:
>
> Router>sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-D-L), Version 12.0(12), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Tue 11-Jul-00 08:19 by htseng
> Image text-base: 0x030388DC, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
> SOFTWARE (fc1)
>
> Router uptime is 1 hour, 11 minutes
> System restarted by power-on
> System image file is "flash:c2500-d-l.120-12.bin"
>
> cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of
> memory.
> Processor board ID 04849258, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash partition 1 (Read ONLY)
> 8192K bytes of processor board System flash partition 2 (Read/Write)
>
> Configuration register is 0x2102
>
>
>
> Thanks for any help.
>
> -Frank
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=443&t=439
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to