Hello,
Here are the logs that I have on my router
Interface IP-Address OK? Method Status
Protocol
Dialer1 10.200.9.1 YES NVRAM up up
Dialer2 10.200.8.3 YES NVRAM up up
Ethernet0 10.20.12.254 YES NVRAM up up
Loopback0 10.127.19.1 YES NVRAM up up
Serial0 unassigned YES unset down down
Serial1 unassigned YES unset administratively down down
Serial0:0 unassigned YES unset down down
Serial0:1 unassigned YES unset down down
Serial0:2 unassigned YES unset down down
Serial0:3 unassigned YES unset down down
Serial0:4 unassigned YES unset down down
Serial0:5 unassigned YES unset down down
Serial0:6 unassigned YES unset down down
Serial0:7 unassigned YES unset down down
Serial0:8 unassigned YES unset down down
Serial0:9 unassigned YES unset down down
Serial0:10 unassigned YES unset down down
Serial0:11 unassigned YES unset down down
Serial0:12 unassigned YES unset down down
Serial0:13 unassigned YES unset down down
Serial0:14 unassigned YES unset down down
Serial0:15 unassigned YES unset reset down
Serial0:16 unassigned YES unset down down
Serial0:17 unassigned YES unset down down
Serial0:18 unassigned YES unset down down
Serial0:19 unassigned YES unset down down
Serial0:20 unassigned YES unset down down
Serial0:21 unassigned YES unset down down
Serial0:22 unassigned YES unset down down
Serial0:23 unassigned YES unset down down
Serial0:24 unassigned YES unset down down
Serial0:25 unassigned YES unset down down
Serial0:26 unassigned YES unset down down
Serial0:27 unassigned YES unset down down
Serial0:28 unassigned YES unset down down
Serial0:29 unassigned YES unset down down
Serial0:30 unassigned YES unset down down
the E1 controller shows
E1 0 is down.
Applique type is Channelized E1 - balanced
Transmitter is sending remote alarm.
Receiver has loss of signal.
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Internal.
Data in current interval (508 seconds elapsed):
121 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 508 Fr Loss Secs, 7 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 508 Unavail
Secs
Total Data (last 4 15 minute intervals):
969 Line Code Violations, 0 Path Code Violations,
1 Slip Secs, 3600 Fr Loss Secs, 81 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 3600 Unavail
Secs
I cannot initiat a call. Can sombody help me.
Rock BASSOLE
Til: +33 (0) 1 45 96 22 03
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=471&t=471
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
