So what does the configuration for serial0:15 look like.
What does show isdn stat tell you?
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "BASSOLE Rock"
To:
Sent: Friday, April 13, 2001 5:33 AM
Subject: Problems with channel D (PRI access) [7:471]
> Hello,
>
>
> Here are the logs that I have on my router
>
>
> Interface IP-Address OK? Method Status
> Protocol
> Dialer1 10.200.9.1 YES NVRAM up up
>
> Dialer2 10.200.8.3 YES NVRAM up up
>
> Ethernet0 10.20.12.254 YES NVRAM up up
>
> Loopback0 10.127.19.1 YES NVRAM up up
>
> Serial0 unassigned YES unset down
down
>
> Serial1 unassigned YES unset administratively down
down
>
> Serial0:0 unassigned YES unset down
down
>
> Serial0:1 unassigned YES unset down
down
>
> Serial0:2 unassigned YES unset down
down
>
> Serial0:3 unassigned YES unset down
down
>
> Serial0:4 unassigned YES unset down
down
>
> Serial0:5 unassigned YES unset down
down
>
> Serial0:6 unassigned YES unset down
down
>
> Serial0:7 unassigned YES unset down
down
>
> Serial0:8 unassigned YES unset down
down
>
> Serial0:9 unassigned YES unset down
down
>
> Serial0:10 unassigned YES unset down
down
>
> Serial0:11 unassigned YES unset down
down
>
> Serial0:12 unassigned YES unset down
down
>
> Serial0:13 unassigned YES unset down
down
>
> Serial0:14 unassigned YES unset down
down
>
> Serial0:15 unassigned YES unset reset
down
>
> Serial0:16 unassigned YES unset down
down
>
> Serial0:17 unassigned YES unset down
down
>
> Serial0:18 unassigned YES unset down
down
>
> Serial0:19 unassigned YES unset down
down
>
> Serial0:20 unassigned YES unset down
down
>
> Serial0:21 unassigned YES unset down
down
>
> Serial0:22 unassigned YES unset down
down
>
> Serial0:23 unassigned YES unset down
down
>
> Serial0:24 unassigned YES unset down
down
>
> Serial0:25 unassigned YES unset down
down
>
> Serial0:26 unassigned YES unset down
down
>
> Serial0:27 unassigned YES unset down
down
>
> Serial0:28 unassigned YES unset down
down
>
> Serial0:29 unassigned YES unset down
down
>
> Serial0:30 unassigned YES unset down
down
>
>
> the E1 controller shows
>
> E1 0 is down.
>
> Applique type is Channelized E1 - balanced
> Transmitter is sending remote alarm.
> Receiver has loss of signal.
> Framing is NO-CRC4, Line Code is HDB3, Clock Source is Internal.
> Data in current interval (508 seconds elapsed):
> 121 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 508 Fr Loss Secs, 7 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 508 Unavail
> Secs
> Total Data (last 4 15 minute intervals):
> 969 Line Code Violations, 0 Path Code Violations,
> 1 Slip Secs, 3600 Fr Loss Secs, 81 Line Err Secs, 0 Degraded Mins,
> 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 3600 Unavail
> Secs
>
> I cannot initiat a call. Can sombody help me.
>
> Rock BASSOLE
> Til: +33 (0) 1 45 96 22 03
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=858&t=471
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
