>I don't know that they do, but the Linksys does support port >redirection.
>Just point the standard telnet port (23) at your inside >router. Once on
>one inside router you can telnet around to others >inside, or you can also
>point other ports from the outside to inside >port 23. The biggest
>limitation that the Linksys has is that it can >only handle one public
>address (I don't know if the NetGear or anything >else can handle more).
>Not really a big deal unless you've got a bunch >of gamers that want to be
>able to play against each other and the >outside world, and they need to
>have the same outside public port >mapped to play.
>
>Anyway, here is what you could do
> Public Private
>63.1.1.1 :23 192.168.1.23 :23
>63.1.1.1 :24 192.168.1.24 :23
>63.1.1.1 :25 192.168.1.25 :23
>63.1.1.1 :26 192.168.1.26 :23
I wasn't aware that it is possible to manipulate the port used to telnet. So
using your example above, I would telnet to device 1 using the outside
destination port of 23, telnet to device 2 using the outside destination
port of 24, telnet to device 3 using the outside destination port of 25? Is
it possible to do this? Would telnet work with ports other than 23? Could
anyone clarify this please?
Thanks for the help,
Fred
>Of course, you might want to pick better ports, but if you don't care about
>housing services public services on the inside, it should work.
>
>My personal suggestion would be to set up an old 486 and run Linux and
>SSHv2
>so that you can SSH in on port 22, and once on the Linux box on the inside,
>telnet to your routers. That way it's all encrypted and no chance of
>someone hijacking your lab. Plus, you can log all the connections to the
>Linux box and have a user list to control access. Of course, there is a
>little bit of a learning curve to get that configured, but it's not that
>bad
>with RH7 and a standard NIC.
>
>--
>Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
>List email: [EMAIL PROTECTED]
>Homepage: http://jason.artoo.net/
>
>
>
>""Fred Danson"" wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hey Group,
> >
> > This is a continuation of the NAT capabilities of small Netgear/Linksys
> > router Post. I am curious, would it be possible for me to do a telnet
>from
> > my remote site to the small router, and then do another telnet from the
> > small router to the inside devices? This would pretty much be a double
> > telnet (if there is such a thing). Does anyone know if most of these
>small
> > routers support outgoing telnet sessions?
> >
> > Thanks again for the help,
> > Fred
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=717&t=717
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
