Muhammed,
you don't really give enough information to be able to give a full answer,
but this may be of use:
http://www.cisco.com/warp/public/793/access_dial/easyip.html
this is an overview of configuring dialup with NAT, what cisco calls
"EasyIP"
hth
----- Original Message -----
From: "Muhammad Faheem"
To:
Sent: Tuesday, April 17, 2001 3:40 PM
Subject: Can I Connect to ISP without Public IP [7:907]
> Hi All
>
> I want to configure Cisco 801 ISDN Router for Internet Access(ISP
> Connection) without any Public IP address, I am unable to locate any
sample
> configuration on Cisco site for the same.
>
> I know how to configure with public ip but havnt done any configuration
> without public ip, I will appreciate if anybody send me the sample
> configuration or any hint for the same.
>
> Thanx
> Muhammad Faheem
> Systems Engineer
> Afcomp
> Hello : (9714)-3529339 / 3027338
> Fax : (9714)-3523842
> Web : www.afcomp.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=927&t=907
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]