One of our customers asks for load balance and fault redundancy. They have a Cisco router 1605 with a serial0 for T1 (216.94.x.x), and eth0 for local network, eth1 for DSL (66.59.x.x). This router satisfies their scenario hardware requirements. How to configure the Cisco router 1605 (just one router, not HSRP) to implement load balance and fault redundancy, and serial0 and eth1 are using different ip block? When DSL and T1 lines are both working fine, they want to have load balance. If one of the lines, either T1 or DSL, is down, they need fault tolerance. Let's say, T1 is down, all the users on the local network automatically use DSL to get to the Internet. Any suggestions will be highly appreciated. Shawn Xu _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=962&t=962 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
