Yes, but if not this situation, then it would be strange.
Also, I would like to ask one question regarding to OSPF database to
clarify my concept.
Suppose I have a circular connection with several routers configuring
OSPF in same area. And there are three pairs A&B, C&D, E&F.
And suppose there is a static route in A and B for pointing to the
firewall within the same subnets as A&B, and also redistribute static
subnets in OSPF in A and B. Is it correct if I just can see only one
entry, suppose say advertised from A in OSPF database for all routers,
but not two entries that advertised from A and B in OSPF database?
Thanks
Regards,
mak
Peter Van Oene wrote:
>
> The same route with a lower admin distance will cause this to happen. For
> example, a connected route or a static etc.
>
> Peter
>
> *********** REPLY SEPARATOR ***********
>
> On 4/22/2001 at 12:10 PM mak wrote:
>
> >Dear all,
> >
> >Would someone can tell me is what situation the route (Type 5) can be
> >seen in OSPF database but not in routing table?
> >
> >Thanks
> >
> >
> >Best Regards,
> >mak
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1534&t=1530
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
