Sorry, I didn't make it clear.
the 6509 has msfc card, the "int vlan 100
ip helper-address 192.168.1.1" config was made on 6509 msfc card.
Do you mean that on the FE port that connect to 6509,
the "ip helper-address" should also be configed ?
Thanks!
>All routing is being done by the 7513 (no msfc card in the 6509)? ?
>
>You are putting the help-address command on the correct interfaces on the
>router?
>
>Can you send configs of the router (if the router is doing all vlan and
>standard routing).
>
>Tony
>
>----- Original Message -----
>
>> Hi,
>> we have a Alcatel 7404 Broadband Access Server which connect to
>> ATM switches ,and the ATM switch connect to several ADSL DSLAMs.
>> 7404 connect to 6509 using 100M port( VLAN 100 for example ). we try to
>use
>> dhcp for the adsl
>> users, and 7404 can only specify a dhcp server. We have a cisco 7513 (
>> 192.168.1.1)
>> act as a dhcp server ,the 7513 connect to 6509.
>> my question is how to set up dhcp relay on cisco 6509?
>> I have tried the following config,seems not work.
>>
>> int vlan 100
>> ip helper-address 192.168.1.1
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1565&t=1524
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
