First- if the interface is in shutdown mode, nothing configured takes
effect. I'm guessing you're cleaning things up for who may come behind you,
wondering why this configured interface is down :o) Complete the command to
represent "no clockrate 2015232." Keep in mind too- starting somewhere
around 11.X, the command changed to Clock Rate. I use Clockrate (no space)
out of habit & find the command gets kicked back every so often.
Let us know how you make out
Phil
----- Original Message -----
From: James Haynes
To:
Sent: Wednesday, April 25, 2001 11:08 AM
Subject: %Clock rate is ignored on DTE interfaces. [7:1875]
> I have a remote 3640 running IOS (tm) 3600 Software (C3640-DS-M), Version
> 11.2(12)P, RELEASE SOFTWARE (fc1).
> whenever I look at the config or reload a new config I get the following
> message at the beginning of the config;
>
> %Clock rate is ignored on DTE interfaces.
>
> Looking at the router interfaces I find:
>
> interface Serial3/2
> description Not in Service
> no ip address
> shutdown
> no snmp trap link-status
> clockrate 2015232
> !
> interface Serial3/3
> description Not in Service.
> no ip address
> shutdown
> no snmp trap link-status
> clockrate 2015232
>
> I have issued the command "no clockrate" on each interface only to see a
> message:
>
> XXXXXXXX(config)#int s3/2
> XXXXXXXX(config-if)#no clockrate
> %Setting clockrate to default value 2015232.
> XXXXXXXX(config)#int s3/3
> XXXXXXXX(config-if)#no clockrate
> %Setting clockrate to default value 2015232.
>
> This is the only 3640 out of many remote sites that is giving me this
> message. It also happens to be the only one with any interfaces that even
> show a clockrate. I've checked CCO with the message and nothing comes back
> that is helpful. Is there a reason for this I am missing, or I am missing
> something in the config to stop this. Thx for any help.
>
> --
> James Haynes
> Network Architect
> Cendant IT
> A+,MCSE,CCNA,CCDA,CCNP,CCDP
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1887&t=1875
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
