Put the particular vty you want to telnet to in a rotary group. Telnet to an
IP address on the router but not to the default port of 23. Telnet to port
7000 + the rotary group number (i.e. telnet 1.1.1.1 7004).
Brian Dennis
CCIE #2210 (R&S)(ISP/Dial)
CCSI #98640
Access_Server-A(config)#line vty 4
Access_Server-A(config-line)#rotary ?
Rotary group to add line to
Access_Server-A(config-line)#rotary 4
Access_Server-A(config-line)#^Z
Access_Server-A#telnet 1.1.1.1 7004
Trying 1.1.1.1, 7004 ... Open
User Access Verification
Username: root
Password:
Access_Server-A>
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dimitrije
Sent: Wednesday, April 25, 2001 6:01 PM
To: [EMAIL PROTECTED]
Subject: How do you telnet into a specific vty port? [7:2005]
How can one telnet into a specific vty port? I changed the password on vty
2 to
allow one specific user access into my 1720. However, I can't telnet into
vty 2
until their are active telnet sessions already established on vty 0 and 1.
Note
vty 2 corresponds to line 8 on this 1720. Also note that I am NOT trying to
reverse telnet. Thanks for any help
regards,
Dimitrije
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2020&t=2005
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
