and to sum up..........
Uploaded a new (different) IOS and it works like a charm.
The old IOS was 12.1(2)T and the new is 12.0(9).
No real reason for 12.0(9), this test was on a lab router so just to see
that the bug was gone.
thanks Brian
Kevin Wigle
----- Original Message -----
From: "Kevin Wigle"
To:
Sent: Thursday, April 26, 2001 12:02 AM
Subject: Re: How do you telnet into a specific vty port? [7:2005]
> with a little more investigation it seems that there are a few "bugs"
> around.......
>
> CSCdp79614 and CSCdr46291 get very close to the problem..........
>
> oh well - time to load yet another IOS.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "Kevin Wigle"
> To:
> Sent: Wednesday, 25 April, 2001 23:23
> Subject: Re: How do you telnet into a specific vty port? [7:2005]
>
>
> > ok, not so cool............
> >
> > done the config but here's my results:
> >
> > ***********************
> >
> > User Access Verification
> >
> > Password:
> > Password OK
> >
> > Queued on rotary line group 4.
> >
> > The rotary line group you attempted to access is full.
> > You have therefore been placed in a queue for the next
> > available line in this group.
> >
> > You may exit the queue by terminating the telnet connection
> >
> > You are now position 1 in the queue.
> >
> > **********************
> >
> > I'm the only one there:
> > terminal>sh user
> > Line User Host(s) Idle Location
> > * 66 vty 0 kwigle idle 00:00:00 64.230.65.56
> > 70 vty 4 idle 00:02:29 64.230.65.56
> >
> > Interface User Mode Idle Peer Address
> >
> > **************************
> >
> > any other hints to make this work??
> >
> > Kevin Wigle
> >
> >
> > ----- Original Message -----
> > From: "Brian Dennis"
> > To:
> > Sent: Wednesday, 25 April, 2001 21:55
> > Subject: RE: How do you telnet into a specific vty port? [7:2005]
> >
> >
> > > Put the particular vty you want to telnet to in a rotary group. Telnet
> to
> > an
> > > IP address on the router but not to the default port of 23. Telnet to
> port
> > > 7000 + the rotary group number (i.e. telnet 1.1.1.1 7004).
> > >
> > > Brian Dennis
> > > CCIE #2210 (R&S)(ISP/Dial)
> > > CCSI #98640
> > >
> > >
> > > Access_Server-A(config)#line vty 4
> > > Access_Server-A(config-line)#rotary ?
> > > Rotary group to add line to
> > >
> > > Access_Server-A(config-line)#rotary 4
> > > Access_Server-A(config-line)#^Z
> > > Access_Server-A#telnet 1.1.1.1 7004
> > > Trying 1.1.1.1, 7004 ... Open
> > >
> > >
> > > User Access Verification
> > >
> > > Username: root
> > > Password:
> > > Access_Server-A>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Dimitrije
> > > Sent: Wednesday, April 25, 2001 6:01 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: How do you telnet into a specific vty port? [7:2005]
> > >
> > >
> > > How can one telnet into a specific vty port? I changed the password
on
> > vty
> > > 2 to
> > > allow one specific user access into my 1720. However, I can't telnet
> into
> > > vty 2
> > > until their are active telnet sessions already established on vty 0
and
> 1.
> > > Note
> > > vty 2 corresponds to line 8 on this 1720. Also note that I am NOT
> trying
> > to
> > > reverse telnet. Thanks for any help
> > > regards,
> > > Dimitrije
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2102&t=2005
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
