To do a T-1 back-to-back cable. cross pins 1&2 with pins 4&5 (1 to 4 - 2 to
5).
______________________________
Thomas Crowe
Technical Director
Research & Development
CTS - Atlanta
Phone: 770-664-3900 ext 45
______________________________
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 26, 2001 3:21 AM
To: [EMAIL PROTECTED]
Subject: Back To Back for WIC-1DSU-T1 [7:2058]
Hello I have two routers 2620 which has WIC-1DSU-T1 each.
The ports are RJ-45
Can I configure both with back to back, if can, what;s the type of cable
should I use and how is the config.
tx,
Grad
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of Thomas Crowe.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2088&t=2058
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
