thanks,
I've found it,
http://www.cisco.com/warp/customer/471/75.html
>From: "Joe McCormack"
>To: "Grad Alfons Kanon"
>Subject: Re: Back To Back for WIC-1DSU-T1 [7:2058]
>Date: Thu, 26 Apr 2001 06:00:21 -0700
>
>We did this with two 2651s. I do not remember the exact wiring but CCO had
>an article which gave instructions.
>
>Joe
>
>----- Original Message -----
>From: "Grad Alfons Kanon"
>To:
>Sent: Thursday, April 26, 2001 12:20 AM
>Subject: Back To Back for WIC-1DSU-T1 [7:2058]
>
>
> > Hello I have two routers 2620 which has WIC-1DSU-T1 each.
> > The ports are RJ-45
> >
> > Can I configure both with back to back, if can, what;s the type of cable
> > should I use and how is the config.
> >
> > tx,
> >
> > Grad
> >
>_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com.
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2096&t=2058
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
