Thanks guys. Got it up and running. Had a few more problems but got around
them . Now i can play with my lab from work !!
Ed
""Kevin Wigle"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Although correct for all intents and purposes, I would include the command
> "no exec" on the lines.
> When interference or other "stuff" bumps the lines, your router tries to
> open an exec session immediately, the "no exec" prevents this but will
open
> a session when you press "enter" a few times. This prevents all those
lines
> being "busy" until you what them and you won't have to clear them all the
> time.
>
> Here is the config for my 2509 with all the address/password stuff
> sanitized.
>
> ***************************
>
> my_router#sh run
> Building configuration...
>
> Current configuration:
> !
> ! Last configuration change at 16:24:00 EST Sun Mar 25 2001 by kwigle
> ! NVRAM config last updated at 16:24:04 EST Sun Mar 25 2001 by kwigle
> !
> version 11.2
> service timestamps debug datetime localtime
> service timestamps log datetime localtime
> service password-encryption
> !
> hostname my_router
> !
> aaa new-model
> aaa authentication login default tacacs+
> aaa authentication login no_tacacs enable
> aaa authorization exec tacacs+
> aaa authorization network tacacs+
> aaa accounting exec start-stop tacacs+
> aaa accounting network start-stop tacacs+
> enable secret 5 abcdefg
> enable password 7 abcdefg
> !
> username Bob password 7 abcdefg
> username Kevin privilege 15 password 7 abcdefg
> ip host r3102 2001 10.0.0.1
> ip host r804 2002 10.0.0.1
> ip host r4500 2004 10.0.0.1
> ip host r4000 2005 10.0.0.1
> ip host cat1912 2007 10.0.0.1
> ip host cat5000 2008 10.0.0.1
> ip host r2514 2003 10.0.0.1
> ip host r1005 2006 10.0.0.1
> ip domain-name abcdefg.com
> ip name-server w.x.y.z
> ip name-server w.x.y.z
> clock timezone EST -5
> clock summer-time EDT recurring
> !
> interface Loopback0
> ip address 10.0.0.1 255.0.0.0
> !
> interface Ethernet0
> description Circuit to the WAVE!
> ip address w.x.y.z a.b.c.d
> no cdp enable
> !
> interface Serial0
> ip address w.x.y.z. a.b.c.d
> !
> interface Serial1
> ip address w.x.y.z a.b.c.d
> !
> router rip
> version 1
> passive-interface Ethernet0
> network w.x.y.z
> !
> ip default-gateway w.x.y.z
> no ip classless
> ip route 0.0.0.0 0.0.0.0 w.x.y.z
> tacacs-server host w.x.y.z
> tacacs-server key abcdefg
> snmp-server community 123 RW
> snmp-server community 456 RO
> !
> line con 0
> exec-timeout 0 0
> login authentication no_tacacs
> line 1 8
> no exec
> transport input all
> line aux 0
> line vty 0
> exec-timeout 0 0
> password 7 abcdefg
> logging synchronous
> !
> ntp clock-period 17179850
> ntp source Ethernet0
> ntp master 15
> ntp server w.x.y.z
> end
>
> ***********************
>
> Kevin Wigle
>
>
> ----- Original Message -----
> From: "Earl Aboytes"
> To:
> Sent: Saturday, 28 April, 2001 12:58
> Subject: Re: Access server configuration [7:2376]
>
>
> > You need to clear the line. Do a show line on the 2509. Anything that
you
> > have not
> > started a session with that has a splat next to it needs a clear line.
> You
> > should be
> > able to do a ctrl-shift-6 x at that point to get back to the 2509 and
then
> > over to the
> > next router.
> >
> > Your configuration is correct.
> > Earl Aboytes, CCIE 6097
> >
> >
> > Ed Dombrowski wrote:
> >
> > > Can anybody post some working configs for a 2509 or 2511. I am going
> nuts
> > > trying to configure a 2509 i just got. I have been using this page as
a
> > > reference but i am not having much luck.
> > > http://www.cisco.com/warp/customer/793/access_dial/comm_server.html. I
> cant
> > > seem to find any other info on the cisco site relating to just setting
> this
> > > thing up plugged into the console ports of my other routers.
Currentl;y
> i
> > > have it working on one router (the 1601) but i cant get a second one t
o
> > work
> > > (2521). I cant tell what the difference is at this point. I will post
my
> > > running configs if anybody can offer some tips. The configs are a bit
> messy
> > > on some of them as these are lab routers and i am studying for my BSCN
> > exam.
> > > I posted this to the other 2 cisco newsgroups yesterday but i think my
> news
> > > server sucks. I still dont see my posts 15 hours later.... Also, the
> 1601
> > > router when i try to connect gives the message connection refused by
> remote
> > > host but if i hit enter again it connects. The 2521 just gives me the
> same
> > > message but wont connect at all. I would really appreciate any help. I
> just
> > > cant find any info that is useful anywhere. I even drove to the
> bookstore
> > > and looked through about 15 books but didnt find anything more
specific
> > then
> > > the page i refrenced above.
> > >
> > > 2509#show run
> > > Building configuration...
> > >
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > service tcp-small-servers
> > > !
> > > hostname 2509
> > > !
> > > enable secret 5 $1$CGrA$aulSLMoAI69oIp45K6r9c1
> > > !
> > > ip subnet-zero
> > > ip host 1601-1 2001 192.168.255.2
> > > ip host 2521-1 2002 192.168.255.2
> > > !
> > > !
> > > !
> > > interface Loopback1
> > > ip address 1.1.1.1 255.0.0.0
> > > no ip directed-broadcast
> > > !
> > > interface Ethernet0
> > > ip address 192.168.255.2 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > interface Serial0
> > > no ip address
> > > no ip directed-broadcast
> > > shutdown
> > > !
> > > interface Serial1
> > > no ip address
> > > no ip directed-broadcast
> > > shutdown
> > > !
> > > ip classless
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > logging synchronous
> > > line 1 8
> > > transport input all
> > > line aux 0
> > > transport input all
> > > line vty 0 4
> > > password zzixx
> > > login
> > > !
> > > end
> > >
> > > 1601-1#show run
> > > Building configuration...
> > >
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname 1601-1
> > > !
> > > enable secret 5 $1$yP.A$VB22oPJAoWuaYRZ5o3.0p1
> > > !
> > > ip subnet-zero
> > > !
> > > !
> > > !
> > > interface Loopback100
> > > ip address 172.16.10.100 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > interface Loopback101
> > > ip address 172.16.11.100 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > interface Ethernet0
> > > no ip address
> > > no ip directed-broadcast
> > > shutdown
> > > !
> > > interface Serial0
> > > ip address 10.1.1.100 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > router eigrp 200
> > > redistribute eigrp 100
> > > network 10.0.0.0
> > > !
> > > router eigrp 100
> > > network 172.16.0.0
> > > !
> > > router ospf 200
> > > network 10.0.0.0 0.255.255.255 area 0
> > > network 172.16.0.0 0.0.255.255 area 0
> > > !
> > > ip classless
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > logging synchronous
> > > line vty 0 4
> > > password zzixx
> > > login
> > > !
> > > end
> > >
> > > 2521-1#show run
> > > Building configuration...
> > >
> > > Current configuration:
> > > !
> > > version 12.0
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname 2521-1
> > > !
> > > enable secret 5 $1$eU1p$E/kXa46E7Hqm4EHzS2r5u/
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > frame-relay switching
> > > !
> > > !
> > > !
> > > interface Serial0
> > > bandwidth 64
> > > ip address 192.168.1.17 255.255.255.240
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > no ip mroute-cache
> > > clockrate 64000
> > > frame-relay intf-type dce
> > > frame-relay route 203 interface Serial2 302
> > > !
> > > interface Serial1
> > > bandwidth 64
> > > ip address 192.168.1.33 255.255.255.240
> > > no ip directed-broadcast
> > > shutdown
> > > clockrate 64000
> > > !
> > > interface Serial2
> > > bandwidth 64
> > > ip address 192.168.1.49 255.255.255.240
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > clockrate 64000
> > > frame-relay intf-type dce
> > > frame-relay route 302 interface Serial0 203
> > > !
> > > interface Serial3
> > > bandwidth 64
> > > ip address 10.1.1.1 255.255.255.0
> > > no ip directed-broadcast
> > > shutdown
> > > clockrate 64000
> > > !
> > > interface TokenRing0
> > > no ip address
> > > no ip directed-broadcast
> > > shutdown
> > > !
> > > interface BRI0
> > > no ip address
> > > no ip directed-broadcast
> > > shutdown
> > > !
> > > ip classless
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > logging synchronous
> > > line aux 0
> > > line vty 0 4
> > > password zzixx
> > > login
> > > --More--
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2404&t=2376
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]