Just think of VLANs as normal broadcast domains. One routes between
broadcast domains. Your config does not create an overlap between the
VLANs, but rather between the IP subnets. To properly route between
broadcast domains, you must have unique IP subnets that do not overlap.
Pete
*********** REPLY SEPARATOR ***********
On 4/30/2001 at 2:13 AM Sammi wrote:
>Still struggling with VLAN's and a basic question escapes me.
>If I create:
> VLAN1 as 10.200.1.x/16
>VLAN2 as 10.200.2.x/16 or /24
>I get "VLAN's overlap", which I assume is a bad thing (at least at my
>skill level, I understand you could use overlapped VLAN's).
>
>So, I'm confused how I can assign scopes to each VLAN, what the exact
>rules are. I'm starting to come to the conclusion I cannot use VLAN's
>without a router. Is that a correct assumption?
>
>Any help, tips, leads appreciated.
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2558&t=2534
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
