It sounds like you want to create a VLAN, assign ports to the VLAN, and then
assign a single IP address to the VLAN. If this is the case, try this:
int 1/1 [repeat on whichever interfaces you want]
bridge vlan 1
circuit VLAN1
ip address 192.168.1.1 /24
That should pretty much do it - you can then add services and content rules
from there. Don't forget a default route, too.
----- Original Message -----
From: George Dodds
To: [EMAIL PROTECTED]
Sent: Thursday, May 03, 2001 7:11 AM
Subject: OT: Arrowpoint port assignment [7:3020]
I've got a pre cisco arrowpoint 800 and i'm wondering
if it's possible to assign a group of ports to an ip
address, currently i'm having to create individual
rules with a single port assigned to the ip address.
Cheers
George
=====
George Dodds
CCNA, MCP
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3021&t=3020
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
