I hope I'm reading this correctly, all you should need to do is add
telnet xx.xx.xx.xx (ip address ) xx.xx.xx.xx (mask) inside (if_name)
""Jim Bond"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I have an IPSEC between central office router to site
> office PIX. Central office uses public IP address,
> site office has only 1 public IP address, therefore,
> uses NAT. Everything works fines except I can't telnet
> from central office to PIX (inside or outside). I can
> telnet from central office to servers inside PIX. Is
> there any command I need to add on the PIX? According
> to CCO, if IPSEC is established, telnet to PIX outside
> should work, right?
>
> Thanks in advance.
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great prices
> http://auctions.yahoo.com/
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3141&t=3003
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
