John,
He was asking to disable the telnet process. This just disables port 23 for
the vty lines like an access-class does. There is not way to disable the
process itself.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
[EMAIL PROTECTED]
(925) 260-2724
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> john mcguinn
> Sent: Friday, May 04, 2001 7:22 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Disable telnet port [7:3237]
>
>
> config t
> line vty 0 4
> transport input none
>
> You have successfully disabled telnet port.
> Jack
>
> ----- Original Message -----
> From: "Brian Dennis"
> To:
> Sent: Friday, May 04, 2001 7:21 PM
> Subject: RE: Disable telnet port [7:3237]
>
>
> > If you put an access-class in on the vty lines that disables everything
> like
> > Chuck recommended no one will be able to telnet in. Also a port
> scan will
> > not show anything on port 23. So telnet would appear to be disabled.
> >
> > There just isn't a way to actually turn off the telnet process
> on a Cisco
> > router. If you really want to stop the telnet process you could
> power off
> > the router but this would stop all the processes 8-)
> >
> > Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
> > 5G Networks, Inc.
> > [EMAIL PROTECTED]
> > (925) 260-2724
> >
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Jacques Atlas
> > > Sent: Friday, May 04, 2001 4:09 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: RE: Disable telnet port [7:3237]
> > >
> > >
> > > On Fri, 4 May 2001, Chuck Larrieu wrote:
> > >
> > > |There is no option "no service telnet" on the IOS I have available to
> me.
> > >
> > > :-) that was just an example of something that would be nice.
> > >
> > > |Your choice would then become an access-list denying telnet to
> > > appropriate
> > > |router interfaces. You can also apply access lists to the vty
> > > ports to limit
> > > |who can telnet in. nope, can't delete the vty lines either.
> > >
> > > acl's for all interfaces is way to complex.
> > >
> > > telnet is not an option. if you can stop the telnet daemon on
> a unix box
> > > you should be able to do it on a cisco device, if it support another
> form
> > > of transport.
> > >
> > > owell
> > >
> > > --
> > > jacques
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3281&t=3237
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
