My Token-ring and the ethernet segments communicate just fine. As, far as
the NT question....I don't know. (It may be my problem)
----- Original Message -----
From: "Vincent Chong"
To:
Sent: Sunday, May 06, 2001 4:37 AM
Subject: Re: PIX config question [7:3352]
> Hi;
>
> 1) What is token Ring ethernet segment? For I know, token ring can not
> direct communicate etherent segment.
>
> 2) I wonder Windows NT can perform SR/TLB function?
> For I know window NT just can perfrom IP forwarding.
>
> 3) The token ring domain can communicate ethernet domain properly?
>
> HTH
> Vincent
>
> ""Brandon"" Strange problem.......
> > Here is the setup
> > I have a PIX firewall directly connect to a token-ring ethernet segment.
> All
> > users on this segment can reach the internet.(I am using NAT......(nat 1
0
> 0)
> > I also have a fast ethernet segment connected to the token ring segment
by
> a
> > router.(NT server) I can ping the inside interface on the PIX from the
> fast
> > ethernet segment, however, no traffic passes through the PIX. (I have a
> route
> > inside statement to the fast ethernet segment) What is going on? Why
can
> I
> > not get to the internet though the PIX.
> >
> > Added notes.....
> > No outbound security is setup
> > PIX in running 5.1(2) software
> > It is an older PIX...(PIX classic)
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3365&t=3352
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
