Yes. Route . I usually use the
following in simple installs:
route inside 10.0.0.0 255.0.0.0 10.0.0.1
route inside 172 255.224.0.0 10.0.0.1
route inside 192.168.0.0 255.255.0.0 10.0.0.1
Just change 10.0.0.1 for your internal router, and then you're set for any
private addressing (so long as you don't have multiple interfaces and/or a
DMZ).
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""John Gotti"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Maybe I'm mistaken, but I thought it was possible to add static routes on
> a PIX firewall?...For instance, if your "outside" interface's IP was
> 198.6.1.4 and your "inside" Interface's IP was 172.16.0.1, couldn't you
add
> a static route to say for IP 172.24.9.0 255.255.255.0 go to 172.24.128.3 ?
I
> know a PIX isn't a router, but I thought it could forward traffic based on
a
> static route. Thanks!!
>
> -G
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3530&t=3484
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
