Post your config, if you don't mind. Nuke the passwords and any IPSEC keys,
etc.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
""Brandon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone have any ideas?
>
> Strange problem.......
> Here is the setup
> I have a PIX firewall directly connect to a token-ring ethernet segment.
All
> users on this segment can reach the internet.(I am using NAT......(nat 1 0
0)
> I also have a fast ethernet segment connected to the token ring segment by
a
> router.(NT server) I can ping the inside interface on the PIX from the
fast
> ethernet segment, however, no traffic passes through the PIX. (I have a
route
> inside statement to the fast ethernet segment) What is going on? Why can
I
> not get to the internet though the PIX.
>
> Added notes.....
> No outbound security is setup
> PIX in running 5.1(2) software
> It is an older PIX...(PIX classic)
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3533&t=3525
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
