Your best option, if I understand your question correctly is to add a static route on your NT box for your local networks. use the command: route add -p [destination] [MASK netmask] [gateway] Use command "route print" to check your NT routing table Any routes not added this way will automatically use your default gateway (only one used on an NT box, as mentioned by the above post). Rgds, Aidan.. ""Hans Stout"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello colleagues, > > I want to route to two different destinations from the same source > addresses. The souces are Windows NT machines with two default gateways; I > want everything going to the Internet going out to one of the gateways, and > everything else going out the other. I am not sure if configuring access > lists does the job; when a packet from the source is denied, does it then > automatically choose the other default gateway ? I guess policy routing > won't work, since the source is the same, only the destinations are > different. Any ideas ? Thanks in advance for your help. > > Regards, > > Hans > _________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3574&t=3569 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
