Phil,
If this is the case, please explain then why i was able to upgrade my 2516
from a 10.2 to 12.1(8) when there were no boot rom chips on the board? The
two 1/2-inch squares were empty. Yet the sh ver says it has IGS-RXBOOT
something. Am i missing someting here? I did put 16F-16D in it. But I reload
and 12.1(8) looks okay. Of course, I haven't had time to run routing
protocols on it. Thanks.
Elmer
-----Original Message-----
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 07, 2001 10:42 PM
To: [EMAIL PROTECTED]
Subject: Re: IOS upgrade, failure [7:3513]
11.2 wiil work, if you have @ least 4 Megs of RAM. Your 10.0 boot ROM's
will make the interfaces disappear in anything above 11.3-ish, until you
upgrade them to 11.0's.
Phil
----- Original Message -----
From: John Brandis
To:
Sent: Monday, May 07, 2001 9:04 PM
Subject: IOS upgrade, failure [7:3513]
> Hey all, I am back on for the day,
> Have a 2503 router with suspected 4MB flash. I need to upgrade from IOS
10.2
> to at least 11.3. Problem is that IOS 11.3 is 5MB.....
> What can I do besides upgrade the flash.??????
>
>
> John Brandis
> Network Engineer
> GoWireless Communications
> 155 George Street Sydney
> +61 2 9251 5000
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3586&t=3513
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
